Monday, 11 July 2011

EG Doors are now stocking the new range of sliding and folding doors from Trufold

In early June 2011, Trufold launched its range of sliding and folding doors. The doorsets are now available in a range of finishes including factory finished oak and factory finished hardwood, with toughened thermally efficient glass for external use and unfinished oak for interior use. The internal doors incorporate toughened 4mm thick glass and come with either 610mm wide doors (slimline sets) or 743mm wide doors (widefit sets) The interior doors open left or right and can be supplied with a one light or four light option.






Our exterior Trufold door range is available to suit openings from 6ft to 16ft. Please visit the EG Doors website for more technical details and images of the Trufold door combinations.

Saturday, 19 February 2011

Fixing a Scratch on a Wooden Door

What do you do when your brand new, carefully chosen and expertly hung door is either accidentally scratched by the tools of a clumsy DIYer or purposefully and repeatedly scratched by your persistent pooch?

Whatever the age and finish of your door there are a number of methods we would recommend to remove those unsightly scratches although the success will depend on the extent of the damage and how well you match the colour of your finishing products.

If the scratches are light – use a fine steel wool and scrape along the grain of the wood. It’s very important not to sand across the grain or you will add to the damage and your newly added scratches will show through the varnish. If the scratches are no longer visible then you are in luck and all you need to do now is paint, stain or varnish the area with a carefully matched paint, stain or varnish.

If the scratches are still visible and obviously much deeper than you had first hoped, use a light sandpaper, again sand along the grain. Use white spirits to clean and degrease the area. Allow the wood to dry and then fill the scratches with wood filler. Choose a filler suitable for your type of wood. Most fillers are suitable for interior and exterior use and you should be able to match the filler to the colour of the wood. You should be able to carefully fill the scratches with the tip of your finger and then wipe away any excess.

Allow the filler to dry completely, drying times vary but it should take no more than 15 minutes. You can then lightly sand the area, wipe of the dust and paint, stain or varnish. You may need several coats and for a small area you may be more successful using an artist’s paint brush.

If the door has a factory applied finish, you will need to carefully match the colour to a wood stain and it may be worth experimenting first with a scrap piece of wood. You may also want to experiment first with the wood filler you choose to discover its properties and how it looks one you have painted, stained or varnished it.

You could also consider either a metal kick plate, or you could simply re-home the offending dog/DIYer… Good Luck!